Adhesives & Tapes

3M™ Adhesive Remover Citrus Base is excellent for removing adhesives including label / sticker residue and sticky tape residue. This product can be sprayed on with no need for parts to soak and it wipes away with just a shop towel, leaving no filmy residue. It is based on citrus oil rather than chlorinated or petroleum-based solvents and can be used to help clean a wide variety of substrates. 

3M™ Super 77™ Multipurpose Spray Adhesive to be an extremely versatile, fast-drying spray adhesive that bonds a wide range of lightweight materials. Our permanent bond provides fast results to keep projects moving ahead. The photo-safe spray formula is easy to dispense and apply directly onto surfaces and materials where needed, with no soak-in or yellowing over time. 

• Finger-touch, targeted control ensures minimal overspray, waste, and cleanup

• Great spray pattern and low soak-in for high coverage and strong, long-lasting bond

• High initial grab and aggressive tack helps keep fast-paced projects moving forward

• Bonds quickly in 15 seconds for fast, permanent results and high productivity

• Lower viscosity formula than competing brands stays in place with little to no run or migration

• Repositionable while providing long-lasting strength

3M Neoprene High Performance Rubber and Gasket Adhesive 1300L Yellow, formerly known as Scotch-Grip, is a low viscosity, polychloroprene adhesive that is used for bonding wood, butyl rubber, plastics, metal, and neoprene. It is high strength, heat resistant, has lower solids, and can be applied by brushing and spraying methods. 1 qt Can. 

3M™ Nitrile High Performance Rubber and Gasket Adhesive 847 is a versatile, solvent based, high performance adhesive with comparatively low viscosity for easy application. It offers both good oil resistance and good heat resistance, and is commonly used for bonding most rubber and gasket materials. 

3M™ Scotch-Weld™ Epoxy Adhesive DP100 is a high-flow, versatile structural adhesive for general purpose bonding. Its low viscosity, clear formulation works on a variety of substrates including metals, ceramics, concrete and wood. With a high shear strength it delivers strong, rigid performance, making it ideal for multiple applications in the electrical, general industrial, construction and consumer goods industries.

Recommended Applications

• General attachment applications in a variety of industries

• Attachment of various substrates that require permanency

• Applications that require machining afterwards

• Applications requiring transparent bond lines

3M™ Scotch-Weld™ Epoxy Adhesive DP105. It works on a variety of substrates including metals, ceramics, glass, wood and many plastics. The low viscosity makes it easy to dispense and self-level; and an effective tool for filleting and potting. It features high shear strength and good peel and impact performance that, when combined with good flexibility, make it ideal for a variety of applications in the transportation, specialty vehicle, electrical, general industrial, sporting goods, construction, and consumer goods industries.

Recommended Applications

• Glass to metal bonding where it sees significant temperature changes, such as glass oven doors

• Bonding jewelry or other items where appearance is critical

• Bonds many plastics

• General attachment applications in a variety of industries

3M™ Scotch-Weld™ Epoxy Potting Compound DP270 is a rigid, two-part epoxy adhesive with a 1:1 mix ratio and 70 minute work life. It provides initial strength in about 3 hours with approximately 2,500 PSI at 72°F (22°C). Additionally, our 3M™ Scotch-Weld™ Epoxy Potting Compound DP270 is low viscosity for easy dispensing and potting; and is non-corrosive to copper. It offers good resistance to medical sterilization and is available in black opaque and transparent amber.

Recommended Applications

• Potting and bonding electrical components

3M™ Scotch-Weld™ Epoxy Adhesive DP460NS exhibits excellent shear and peel strength along with good impact durability. It bonds to many surfaces, such as ceramics, metals, glass, wood and some plastics. When it comes to preparation and application, 3M™ Scotch-Weld™ Epoxy Adhesive DP460NS is straightforward and easy-to-use. Simply mix the components with a 2:1 by volume mix ratio and then apply according to the instructions to achieve a strong, long-lasting bond. 

• 60 minute work life with handling strength in four hours allows sufficient time for re-positioning

• Toughened for impact resistance and high fatigue resistance to withstand demanding conditions

• Outstanding environmental performance

• High peel and shear strength for strong bonds in critical applications

• Non-sag formulation

3M™ Scotch-Weld™ Epoxy Adhesive DP760. Our two-part, white, general purpose adhesive is non-sag and won’t run or dissipate. It cures at room temperature and is ideal for hot and humid environments, due to its high temperature resistance. Work confidently and more efficiently as the adhesive gives you enough time to position or slide two components together, then set to handling strength in seconds. It continues to cure on finished materials, while you concentrate on the next job. Use it to bond a wide variety of substrates like wood, fibre, reinforced plastic, metal and glass. 

3M™ Scotch-Weld™ Structural Epoxy Adhesive EC-9323 B/A is a two component epoxy paste adhesive which cures at room temperature or with mild heat to form a tough, impact resistant structural bond. It has an excellent adhesion to a wide variety of substrates such as metals, glass, ceramics and plastics, incl. GFRP and CFRP. Once cured it provides extremely high shear and peel strength over a wide temperature range, with outstanding resistance to harsh environments and chemicals commonly encountered in aerospace applications. 

• Has excellent lap shear and peel strength at room and elevated temperatures

• Convenient mix ratio

• Bond thickness control

• Outstanding resistance to harsh environments and chemicals

• High impact resistance

• High environmental resistance

3M™ Scotch-Weld™ EPX™ Manual Applicators are used to dispense two-component 3M™ Scotch-Weld™ Structural Adhesives packaged in Duo-Pak (DP) cartridges. There are a variety of applicators available to match the needs of your manufacturing process. 

3M™ Hot Melt Applicators are designed to help improve productivity, lower costs and minimize waste in industrial applications. From high volume to detail work, 3M™ Hot Melt Applicators ensure optimum performance through melt-on-demand or progressive feed technology to meet your production deadlines. 

3M™ Scotch-Weld™ EPX Mixing Nozzles perform to exact requirements for easy uniform application. These 3M approved accessories work with 3M Duo-Pak cartridges to simultaneously meter, mix and apply two-part adhesives and potting compounds. And, the tapered tips can be cut for precise bead size.

Recommended Applications

• Attach to 3M Duo-Pak structural adhesive cartridges

• Dispense with 3M EPX Manual or pneumatic applicators

3M™ Scotch-Weld™ EPX Mixing Nozzles perform to exact requirements for easy uniform application. These 3M approved accessories work with 3M Duo-Pak cartridges to simultaneously meter, mix and apply two-part adhesives and potting compounds. And, the tapered tips can be cut for precise bead size.

Recommended Applications

• Attach to 3M Duo-Pak structural adhesive cartridges

• Dispense with 3M EPX Manual or pneumatic applicators